Rift Zone Carbon 29 2 Frame Kit
See this bike in a different color:
- Price: $3,399*
- Suspension: Fox Float DPX2
- Wheel Size : 29"
- Frame: Carbon Fiber
S, M, L, XL
Size Rider height range S 160cm to 168cm M 168cm to 178cm L 178cm to 188cm XL 188cm to 193cm
FAST PACED, EPIC RIDES
PUSHING THE ENVELOPE UP AND DOWN THE TRAIL
CHASING PERSONAL RECORDS
The Rift Zone is our most speed oriented MultiTrac bike, created for the rider looking for the speed and roll over capabilities of 29” wheels in a trail capable package. Long, low, and slack trail geometry is more aggressive than an XC race bike for more control at top speed, and more fun while chasing seconds.
All New Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs
Fox Float DPX2, Performance Series, EVOL Air Spring, 3-Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x30mm Top, M8x25mm Bottom
FSA No 42/47, Sealed Cartridge Bearings, 1 1/8” x 1 1/2”
Marin MTB Seat Clamp Bolt Type, Bolt-On Thru-Axle, Downtube and Chainstay Protectors
Specifications, pricing, and availability are subject to change without notice.
All lengths in millimeters
REAR SHOCK SET UP
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Fox Float DPX2