Alpine Trail Carbon 2 Frame Kit
See this bike in a different color:
- Price: $2,299.00*
- Suspension: Fox Float DPX2
- Wheel Size : 29"
- Frame: Carbon Fiber
-
Size Range:
S, M, L, XL
Size Rider height range S 5'3" to 5'6" M 5'6" to 5'10" L 5'10" to 6'2" XL 6'2" to 6'4"
BIG ALL-MOUNTAIN DAYS WHERE TRAVEL AND GEOMETRY MATTER MOST
BUILT FOR ABUSE AND ROWDY RIDING
ENDURO-STYLE RIDING AND RACING
BIG BIKE, BIG WHEELS, BIG FUN
The Alpine Trail is a 29” wheeled full suspension bike built for the all day enduro rider that earns their downhill fun.
Jump to…
Specifications
-
Frame
All New Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 150mm Travel MultiTrac Suspension Platform, Internal Dropper Post and Rear Derailleur Routing, Chainstay Mounted Post Mount Disc Brake, 148x12mm Boost Thru- Axle, 73mm Threaded BB w/ ISCG05 Tabs
-
Rear Suspension
Fox Float DPX2, Performance, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, 205x65mm, Trunnion Upper Mount, M8x25mm Lower Mount
-
Headset
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
-
Extras
Marin MTB Seat Clamp, Bolt Type
-
Extras
Bolt-On Thru-Axle
-
Extras
Downtube Protector
Specifications, pricing, and availability are subject to change without notice.
Geometry
S | M | L | XL | |
---|---|---|---|---|
Stack | 619 | 628 | 632 | 643 |
Reach | 430 | 455 | 480 | 515 |
Headtube Angle | 63.5° | 63.5° | 63.5° | 63.5° |
Headtube Length | 100 | 110 | 115 | 130 |
Seattube Angle | 78° | 78° | 78° | 78° |
Seattube Length | 390 | 400 | 425 | 430 |
Toptube Effective | 561.7 | 589 | 615 | 652 |
BB Height | 342 | 342 | 342 | 342 |
BB Drop | 35 | 35 | 35 | 35 |
Chainstay | 430 | 430 | 430 | 430 |
Wheelbase | 1199 | 1229 | 1256 | 1297 |
Standover Height | 690 | 694 | 695 | 698 |
Fork Offset | 44 | 44 | 44 | 44 |
All lengths in millimeters
Suspension Setup
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Fox Float DPX2
LBS | KG | PSI |
---|---|---|
120 | 54 | 106 |
130 | 59 | 116 |
140 | 64 | 128 |
150 | 68 | 140 |
160 | 73 | 152 |
170 | 77 | 164 |
180 | 82 | 176 |
190 | 86 | 188 |
200 | 91 | 202 |
210 | 95 | 216 |
220 | 100 | 230 |
230 | 104 | 245 |
240 | 109 | 260 |
250 | 113 | 275 |
260 | 118 | 291 |
270 | 122 | 308 |
You May Also Like
-
Alpine Trail Carbon 2
- Description: Wheel Size : 29", Full Suspension | Carbon Fiber
- Price: $4,399.00
-
Alpine Trail Carbon 1
- Description: Wheel Size : 29", Full Suspension | Carbon Fiber
- Price: $3,379.00
-
Rift Zone Carbon 29 2 Frame Kit
- Description: Wheel Size : 29", Full Suspension | Carbon Fiber
- Price: $2,349.00