See this bike in a different color:
- Price: $2,679.00*
- Suspension: Marzocchi Bomber Z2 27.5" / Fox Float DPS
- Wheel Size: 27.5"
- Frame: Aluminum
XS, S, M, L, XL
Size Rider height range XS 5'1" to 5'4" S 5'4" to 5'7" M 5'7" to 5'10" L 5'10" to 6'1" XL 6'1" to 6'4"
Manufacturer’s suggested retail price may not include additional shipping or preparation charges. Please contact your local Marin dealer for a quote.
ALL AROUND TRAIL ENJOYMENT
The Rift Zone 27.5 is our most playful trail bike, made for the rider that catches a bit of air off of every root in the trail, is always looking for an alternate line, and ends every ride with a smile. This is an all-around suspension bike with trail performance far out stretching the asking price.
Key upgrades from Rift Zone 27.5 2:
- Marzocchi Bomber/Fox Float DPS suspension
- Shimano SLX drivetrain
- Shimano SLX 4-piston brakes
Series 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs
Marzocchi Bomber Z2 27.5", Rail Damper with Sweep Adjustment, 130mm Travel, Kabolt Bolt-On Axle, 44mm Offset
Fox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x25mm Hardware Top and Bottom
Marin Aluminum Double Wall, 29mm Inner, Sleeved Joint, Disc Specific, 32H, Tubeless Compatible
Shimano HB-MT410B, 148x12mm, Centerlock, Microspline Freehub Body
Shimano HF-MT410B, 110x15mm, Centerlock
14g Black Stainless Steel
Maxxis Assegai, 27.5x2.5", MAXX TERAA, EXO, Tubeless Compatible
Shimano SLX, 12-Speed, SGS
Shimano Deore, 12-Speed, SL-7100R, I-Spec EV
FSA Grid, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing
Mego EXO 73mm BSA
KMC X-12 Silver and Black
Shimano, SLX 12-Speed, 10-51T
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
Shimano MT420, 4-Piston Hydraulic Disc Brake, 180mm Rotor
Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
Marin 3D Forged Alloy, 35mm
Marin Single Clamp Locking
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
TranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 175mm Travel, 30.9mm
Marin Speed Concept
|Head Tube Angle||66.5°||66.5°||66.5°||66.5°||66.5°|
|Head Tube Length||105||110||120||125||130|
|Seat Tube Angle||75°||74.7°||74.5°||74.3°||74.1°|
|Seat Tube Length||330||380||425||470||515|
|Top Tube Effective||570.6||586.8||608.1||632.9||651.9|
|Stand Over Height||647||665||702||727||768|
|Seat Post Diameter||30.9||30.9||30.9||30.9||30.9|
All lengths in millimeters
The Rift Zone 27.5 has a Series 3 6061 butted and hydroformed aluminum frame with 120mm travel MultiTrac suspension technology and playful 27.5” wheels. 27.5” wheels fit most riders better and create a lightweight and responsive bike, the most playful trail bike in the line.Learn More
MULTITRAC SUSPENSION TECHNOLOGY
MultiTrac is an acclaimed suspension system, fine-tuned to have a balanced ride capable of absorbing big hits with an efficient pedaling platform. The rocker link provides a progressive leverage ratio for the rear shock for small bump sensitivity and the feeling of a long travel system on large drops and rocks.
Rift Zone 27.5 models are compatible with internally routed dropper posts, with internal rear derailleur routing for a clean look and snag free ride.
Boost front spacing is paired with a 148x12mm Boost rear thru-axle on the Rift Zone 27.5 3 and Rift Zone 27.5 2 for frame and wheel strength, and future wheel upgrade compatibility.
CLOSED 9-12 AXLE
The Rift Zone 27.5 1 is spec’d with a 141x9mm axle that is upgradable to a Boost 148x12mm standard, allowing for more options if you decide to take your bike to the next level.
REAR SHOCK SETUP
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Fox Float DPS