Rift Zone E1

RIFTZONE E1 P Cush Core

Inne dostępne kolory:

  • Cena: 19 999 zł*
  • Zawieszenie: RockShock Pike / RockShox Deluxe Select+
  • Rozmiar koła: 29"
  • Rama: Aluminum
  • Zakres rozmiarów: S, M, L, XL
  • Sugerowana cena detaliczna producenta może nie zawierać dodatkowych kosztów wysyłki lub kosztów przygotowania roweru. Aby uzyskać szczegóły, skontaktuj się z lokalnym dealerem Marin.

Highlights

System
Shimano Steps EP6
Max torque
85Nm
Max assisted speed
20 km/h
Battery capacity
630Wh
Range
19-50 miles / 30-80km*
Rider app
Shimano E-TUBE RIDE

Highlights Disclaimers

* Based on rider weight, terrain, climate and level of assistance used.

ROWER GÓRSKI ZE WSPOMAGANIEM

JESZCZE WIĘCEJ ZJAZDÓW

JESZCZE WIĘCEJ ZABAWY

Nasza środkowa propozycja to Marin Rift Zone E1. Doskonale równoważy on wydajność i wartość. Wyższej klasy amortyzacja od firmy RockShox. Niezawodny i wytrzymały 11-biegowy układ napędowy Shimano Deore. Nowy silnik Shimano STEPS EP6 połączony jest z większym akumulatorem 630Wh dla maksymalnego zasięgu. Dodatkowo rower od razu po wyjęciu z pudełka posiada system bezdętkowy, który wystarczy zalać dołączonym "mlekiem" Marina, a prawdziwą wisienką na torcie są od razu zainstalowane oryginalne wkładki CushCore w obu kołach.

Kluczowe zmiany względem modelu Rift Zone E:

  • Bateria 630 Wh
  • Widelec Rock Shox Pike Motion Control
  • Tylny amortyzator Rock Shox Deluxe Select+
  • Napęd Shimano Deore 11-speed
  • Wkładki do opon CushCore i uszczelniacz Marin w standardzie
marin wpis na blogu

Specyfikacja

  • FRAME

    All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

  • FORK

    RockShock Pike Base 29", Motion Control Damper, 140mm Travel, Maxle Stealth Axle, 42mm Offset

  • SHOCK

    RockShox Deluxe Select+, Compression and Rebound Adjustment, 210x55, 25xM8 Lower and Upper Mount

  • RIMS

    Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible

  • HUBS REAR

    Shimano HB-TC500, 148x12mm, Centerlock, Standard Freehub Body

  • HUBS FRONT

    Shimano FH-TC500, 110x15mm, Centerlock, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing

  • DERAILLEUR REAR

    Shimano Deore, Direct Attachment, 11-Speed, SGS

  • SHIFT LEVER

    Shimano Deore, 11-Speed, I-Spec EV

  • CRANKSET

    Shimano EM600, 160mm Length, 38t Chainring

  • MOTOR

    Shimano Steps EP6 Drive Unit, 250W, 85Nm, 25 km/h Top Assisted Speed

  • CHAIN

    KMC X-10E, Silver

  • CASSETTE

    SunRace 11-Speed, 11-51T

  • BRAKE FRONT

    Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor

  • BRAKES REAR

    Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor, w/ Bolt on Speed Sensor

  • BRAKE LEVERS

    Tektro Slate EVO Hydraulic Lever, I-Spec EV Compatible

  • HANDLEBAR

    Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back

  • STEM

    Marin 3D Forged Alloy, 35mm

  • GRIPS

    Marin Grizzly Lock On

  • HEADSET

    FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm

  • SADDLE

    Marin eMTB Saddle

  • PEDALS

    Marin MTB Plastic

  • BATTERY

    Shimano BT-EN806, Internal 630Wh

  • DISPLAY

    Shimano SC-E600

  • SWITCH

    Shimano SW-EN600L Left Hand Switch for Assist Mode Change

  • EXTRAS

    Shimano Battery Charger EC-E6002, 2A; Shimano CS-EN800 Chainguide, CushCore Tire Inserts and Valve Stems, Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool Cap

  • Range, Charging Time

    30-80km (Based on Rider Weight, Terrain, Climate and Level of Assist Used), 11 Hours (estimated, under ideal conditions)

Specifications, pricing, and availability are subject to change without notice.

Geometria

Rift Zone E1 geometry diagram
S M L XL
Stack 606.98 614.04 625.1 634.16
Reach 445 465 485 515
Headtube Angle 65° 65° 65° 65°
Headtube Length 100 110 120 130
Seattube Angle 77° 77° 77° 77°
Seattube Length 390 400 425 435
Toptube Effective 585.13 607.22 629.32 661.41
BB Height 348.5 348.5 348.5 348.5
BB Drop 32 32 32 32
Chainstay 440 440 440 440
Wheelbase 1198.29 1222.52 1246.74 1280.97
Standover Heigth 693.65 696.01 709.94 719.93
Fork Offset 42 42 42 42
Seatpost Diameter 30.9 30.9 30.9 30.9
Handlebar Width 780 780 780 780
Stem Length 35 35 35 35
Crank Length 160 160 160 160

All lengths in millimeters

Zastosowane technologie

Rift Zone E1 toptube detail.

SERIES 4 ALUMINUM FRAME

Rift Zone E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

Rift Zone E1 suspension detail.

MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system, with 140mm of suspension for the best on-trail experience.

Shimano STEPs drive unit detail.

SHIMANO STEPS

Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Rift Zone E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.

Tabela ciśnień zawieszenia

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

RockShox Deluxe Select+

Waga użytkownika - ciśnienie
LBS KG PSI
120 54 135
130 59 150
140 64 165
150 68 180
160 73 195
170 77 210
180 82 225
190 86 240
200 91 255
210 95 270
220 100 280
230 104 289
240 109 297
250 113 304
260 118 310
270 122 315

What is CushCore?

Wondering what CushCore is and why it comes standard in some of our bikes? Click the link below to Learn More.
Learn More