Wolf Ridge Pro

Bike detail 1 color 1 2920 Bike detail 1 color 2 2920 Bike detail 1 color 3 2920

See this bike in a different color:

  • Suspension: Full, 150mm/150mm
  • Wheel Size: 20"
  • Frame: Carbon Fiber
  • Size Range: S, L, XL

This is a test, this is only a test

Specifications

  • Front Suspension

    Fox Float 36 29", Factory, GRIP 2 3-Position, High and Low Speed Compression Adjustment, High and Low Speed Rebound Adjustment, 110x15mm Boost Spacing, 51mm Offset

  • Rear Suspension

    Fox Float X2 Factory, 200x57mm, High and Low Speed Compression Adjustment, High and Low Speed Rebound Adjustment, Custom Tune, Custom Decals, 25.4mm x M8 Upper Hardware, Custom Lower Hardware

  • Hub Rear

    New Shimano XTR, Alloy Body, Cartridge Bearings, 148x12 E-Thru Axle, 28H, Mircospline Freehub Body

  • Rim

    e*thirteen TRS Race, Carbon Fiber Rim, 28H, 31mm Inner, Hookless, Tubeless Compatible

  • Hub Front

    New Shimano XTR, Alloy Body, Cartridge Bearings, 110x15 E-Thru Axle, 28H

  • Spokes

    The Hive Triple-Butted, Black, J-bend

  • Tires

    Front: e*thirteen, TRS Race All-Terrain Tire, 29x2.35", 72tpi, Single Ply Apex Aramid Reinforced, Race Compound, Tubeless Compatible; Rear: e*thirteen, TRS PLUS All-Terrain Tire, 29x2.35", 72tpi, Race Compound, Tubeless Compatible

Specifications, pricing, and availability are subject to change without notice.

Geometry

Wolf Ridge Pro geometry diagram
S M L XL
Stack 1 2 3 4
Reach 5 6 7 8
Headtube Angle 9 10 11 12
Headtube Length 13 14 15 16

All lengths in millimeters

Suspension Setup

Rear Shock Set Up

  1. Step 1: Set correct pressure in rear shock.
  2. Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
  3. Step 3: Re-set o-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
  4. Step 4: Measure sag (from o-ring to seal of shock), if it does not match the bike’s recommended sag in millimeters, repeat process.
  5. Step 5: Adjust rebound setting to ensure proper control.

Fork Set Up

Marin recommends that all bikes front and rear suspension feels balanced.

  1. Step 1: After rear sag is set, follow the recommended pressure from the fork manufacturer.
  2. Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced. If the front does not match the rear, add or release pressure.
  3. Step 3: Once the bike feels balanced, adjust the rebound damping to ensure proper control.

Wolf Ridge Pro Fox Float X2 Factory Shock

Rider weight and air pressure
LBS KG PSI
10 20 30
40 50 60
70 80 90

Reviews

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etenim semper illud extra est, quod arte comprehenditur. Hanc ergo intuens debet institutum illud quasi signum absolvere. Non autem hoc: igitur ne illud quidem. Duo Reges: constructio interrete. Equidem, sed audistine modo de Carneade? Utrum igitur tibi litteram videor an totas paginas commovere?

Tu autem negas fortem esse quemquam posse, qui dolorem malum putet. Itaque nostrum est-quod nostrum dico, artis est-ad ea principia, quae accepimus. Ait enim se, si uratur, Quam hoc suave! dicturum. Sed ille, ut dixi, vitiose. Ut optime, secundum naturam affectum esse possit.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sin tantum modo ad indicia veteris memoriae cognoscenda, curiosorum. Quo studio Aristophanem putamus aetatem in litteris duxisse? Duo Reges: constructio interrete. Mihi enim satis est, ipsis non satis. Scientiam pollicentur, quam non erat mirum sapientiae cupido patria esse cariorem. Pugnant Stoici cum Peripateticis. Quae si potest singula consolando levare, universa quo modo sustinebit?

— Someone else

You May Also Like

You’re currently viewing the Marin Bikes of United States website. Please note: Translations in progress.

Would you like to switch countries?