See this bike in a different color:
- Price: $4,999.00 (USD)*
- Suspension: RockShock Pike / RockShox Deluxe Select+
- Wheel Size : 29"
- Frame: Aluminum
S, M, L, XL
Size Rider height range S 5'3" to 5'6" M 5'6" to 5'10" L 5'10" to 6'1" XL 6'1" to 6'4"
Manufacturer’s suggested retail price may not include additional shipping or preparation charges. Please contact your local Marin dealer for a quote.
- 630Wh Battery
- RockShox Pike/Deluxe Select+ Suspension
- Shimano Deore 11-speed Drivetrain w/11-51t Cassette
MOUNTAIN BIKING WITH A BOOST
THE JACK-OF-ALL-TRADES MTB, ELECTRIFIED
Our mid-price, mid-tier Rifty E, the Marin Rift Zone E1 is beautifully balancing performance and value. RockShox handles the suspension, Shimano Deore brings a tough, reliable 11-speed drivetrain and Shimano’s STEPS EP6 drive unit powers you up, along and down. A 630WH battery is supplied as standard for maximum range and we’ve included CushCore tire inserts and Marin tubeless sealant straight out of the box.
All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
RockShock Pike Base 29", Motion Control Damper, 140mm Travel, Maxle Stealth Axle, 42mm Offset
RockShox Deluxe Select+, Compreson and Rebound Adjustment, 210x50, 25xM8 Lower and Upper Mount
Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
Shimano HB-TC500, 148x12mm, Centerlock, Standard Freehub Body
Shimano FH-TC500, 110x15mm, Centerlock, 32H
14g Black Stainless Steel
Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing
Shimano Deore, Direct Attachment, 11-Speed, SGS
Shimano Deore, 11-Speed, I-Spec EV
Shimano EM600, 160mm Length, 38t Chainring
Shimano Steps EP6 Drive Unit, 250W, 85Nm
KMC X-10E, Silver
SunRace 11-Speed, 11-51T
Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor
Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor, w/ Bolt on Speed Sensor
Tektro Slate EVO Hydraulic Lever, I-Spec EV Compatible
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
Marin 3D Forged Alloy, 35mm
Marin Grizzly Lock On
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm
Marin eMTB Saddle
Marin MTB Plastic
Shimano BT-EN806, Internal 630Wh
Shimano SW-EN600L Left Hand Switch for Assist Mode Change
Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, Cap Cush Core Pro Tire Inserts Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool
Specifications, pricing, and availability are subject to change without notice.
All lengths in millimeters
SERIES 4 ALUMINUM FRAME
Rift Zone E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system, with 140mm of suspension for the best on-trail experience.
Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Rift Zone E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.
REAR SHOCK SETUP
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
RockShox Deluxe Select+